It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Point clouds are among the most important photogrammetry and remote sensing data that provide three-dimensional information about objects and features. These points have unorganized, irregular structures and do not have uniform spacing. In this paper, two innovative methods for converting the point cloud into a grid are presented. The first method is called the mesh method. It generates all possible 3D grid points covering the point cloud. Then, the distances between the generated grid points and the original points are measured. Based on these distances, the required grid points are determined. The second method is the resampling method. It uses three equations to resample the original point so that the points are moved to new coordinates to create the grid points. The methods are tested on three different point clouds. The results show that the two methods are very fast. However, the resampling method is much faster, especially for very large areas.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details

1 School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, Tehran, Iran; School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, Tehran, Iran; Faculty of Surveying and Geomatic Engineering, Tishreen University, Latakia, Syria
2 School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, Tehran, Iran; School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, Tehran, Iran; i3mainz – Institute for Spatial Information and Surveying Technology, Mainz University of Applied Sciences, Germany