It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The leakage neutron spectrum measurements have been done on benchmark spherical assembly-nickel sphere with a diameter of 50 cm and a copper cube (block) with dimensions of 49.5 x 49.5 x 48 cm3 in Research Centre Rez (RC Rez). The 252Cf neutron source was placed into the centre of nickel sphere and copper cube. The proton recoil method was used for the neutron spectrum measurement using spherical hydrogen proportional detectors (HPD) with pressure of 400 and 1000 kPa (diameter of detectors is 4 cm) and scintillation stilbene (ST) detector (diam. of 1 x 1 cm). The neutron energy range of spectrometer is from 0.04 MeV to 1.3 MeV for HPD and from 1 MeV to 12 MeV for ST. The adequate MCNP neutron spectrum calculations based on data libraries ENDF/B-VII.1, ENDF/B-VIII.0, JEFF-3.3, BROND-3.1 were done and compared with the experiment, i.e., calculation to experiment ratio C/E was determined.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer