Aluminum foil negative electrodes with multiphase microstructure for all-solid-state Li-ion batteries

Abstract

Metal negative electrodes that alloy with lithium have high theoretical charge storage capacity and are ideal candidates for developing high-energy rechargeable batteries. However, such electrode materials show limited reversibility in Li-ion batteries with standard non-aqueous liquid electrolyte solutions. To circumvent this issue, here we report the use of non-pre-lithiated aluminum-foil-based negative electrodes with engineered microstructures in an all-solid-state Li-ion cell configuration. When a 30-μm-thick Al_94.5In_5.5 negative electrode is combined with a Li₆PS₅Cl solid-state electrolyte and a LiNi_0.6Mn_0.2Co_0.2O₂-based positive electrode, lab-scale cells deliver hundreds of stable cycles with practically relevant areal capacities at high current densities (6.5 mA cm⁻²). We also demonstrate that the multiphase Al-In microstructure enables improved rate behavior and enhanced reversibility due to the distributed LiIn network within the aluminum matrix. These results demonstrate the possibility of improved all-solid-state batteries via metallurgical design of negative electrodes while simplifying manufacturing processes.

Aluminum-based negative electrodes could enable high-energy-density batteries, but their charge storage performance is limited. Here, the authors show that dense aluminum electrodes with controlled microstructure exhibit long-term cycling stability in all-solid-state lithium-ion batteries.