Elucidating Ion Transport Phenomena in Sulfide/Polymer Composite Electrolytes for Practical Solid-State Batteries

Abstract

Highlights

Mechanistic understanding of ion transport phenomena in composite solid-state electrolytes (CSEs) for practical solid-state batteries is conducted.

Percolation threshold formation of the inorganic (LPSCl) phase in the CSEs depends on elasticity of the gel polymer electrolyte (GPE) phase.

Manipulating the solvation/desolvation behavior of the GPE phase facilitates ion conduction across the LPSCl-GPE interfaces.

Despite the enormous interest in inorganic/polymer composite solid-state electrolytes (CSEs) for solid-state batteries (SSBs), the underlying ion transport phenomena in CSEs have not yet been elucidated. Here, we address this issue by formulating a mechanistic understanding of bi-percolating ion channels formation and ion conduction across inorganic-polymer electrolyte interfaces in CSEs. A model CSE is composed of argyrodite-type Li₆PS₅Cl (LPSCl) and gel polymer electrolyte (GPE, including Li⁺-glyme complex as an ion-conducting medium). The percolation threshold of the LPSCl phase in the CSE strongly depends on the elasticity of the GPE phase. Additionally, manipulating the solvation/desolvation behavior of the Li⁺-glyme complex in the GPE facilitates ion conduction across the LPSCl-GPE interface. The resulting scalable CSE (area = 8 × 6 (cm × cm), thickness ~ 40 μm) can be assembled with a high-mass-loading LiNi_0.7Co_0.15Mn_0.15O₂ cathode (areal-mass-loading = 39 mg cm^–2) and a graphite anode (negative (N)/positive (P) capacity ratio = 1.1) in order to fabricate an SSB full cell with bi-cell configuration. Under this constrained cell condition, the SSB full cell exhibits high volumetric energy density (480 Wh L_cell⁻¹) and stable cyclability at 25 °C, far exceeding the values reported by previous CSE-based SSBs.