It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Developing strain sensors with both high sensitivity and high linearity has always been the goal of researchers. Compared to resistive strain sensors, capacitive strain sensors have incomparable linearity advantages, but have always been limited by low sensitivity. Here, we report a gradient stiffness sliding design strategy that addresses this problem, significantly improving sensitivity while maintaining high linearity. By controlling the distribution of the locally enhanced electric field and the heterogeneous deformation of the substrate, a strain sensor with excellent performance is successfully prepared, exhibiting a giant gauge factor (9.1 × 106) and linearity (R2 = 0.9997) over the entire sensing range, together with almost no hysteresis and fast response time (17 ms). The gradient stiffness sliding design is a general strategy expected to be applied to other types of sensors to achieve ultra-high sensitivity and ultra-high linearity at the same time.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details



1 Harbin Institute of Technology, National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin, China (GRID:grid.19373.3f) (ISNI:0000 0001 0193 3564)
2 Sichuan University, State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Chengdu, China (GRID:grid.13291.38) (ISNI:0000 0001 0807 1581)