Phase-change behavior of RuSbTe thin film for photonic applications with amplitude-only modulation

Abstract

Ge₂Sb₂Te₅ (GST), the most mature phase-change materials (PCM), functions as a recoding layer in nonvolatile memory and optical discs by contrasting the physical properties upon phase transition between amorphous and crystalline phases. However, GST faces challenges such as a large extinction coefficient (k) and low thermal stability of the amorphous phase. In this study, we introduce RuSbTe as a new PCM to address the GST concerns. Notably, the crystallization temperature of the amorphous RuSbTe is approximately 350 °C, significantly higher than GST. A one-order-of-magnitude increase in the resistivity contrast was observed upon phase transition. The crystalline (0.35–0.50 eV) and amorphous (0.26–0.37 eV) phases exhibit relatively small band gap values, resulting in substantial k. Although RuSbTe demonstrates a k difference of approximately 1 upon crystallization at the telecommunications C-band, the refractive index (n) difference is negligible. Unlike GST, which induces both phase retardation and amplitude modulation in its optical switch device, RuSbTe exhibits amplitude-only modulation. This study suggests that RuSbTe has the potential to enable new photonic computing devices that can independently control the phase and amplitude. Combining RuSbTe with phase-only modulators could open avenues for advanced applications.