It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
To lower environmental-based operation costs, many literatures studied the relationship between the energy generation side (EGS) and building load (BL) demand side based on solar-based integrated energy systems (SIESs), without directly considering the effect of energy from energy transportation and storage side (ETSS) on BL demand, which may result in waste of solar energy extracted. To enhance energy utilization, this study proposed an analysis method that renewable energy source shares among different buildings was investigated based on the supply relationship between energy from the ETSS side and BL demand side. ETSS included an electric boiler/chiller (EB/C), double-effect absorption heat pump (AHP) and tank. According to the energy sources from ETSS and building loads for a hotel, a residence and a hospital on a heating/cooling day. The proposed analysis method was used to develop the potential of available renewable energy through energy sharing from the perspective of the energy consumption differences of the three buildings. The results presented that the potential of renewable energy utilization was further developed by reasonably operating the use and storage of energy sources from ETSS based on the optimization between energy sources from EGS and building loads. Energy source shares among different buildings with different energy consumption characteristics enhanced energy efficiency according to reasonably change the useable time of energy sources from tanks. When a building required a large number of energy sources, the buildings with low energy consumption directly shared renewable energy without considering the use of energy storage. This study can provide a reference for optimizing the design of integrated energy system (IES)-based architecture with different building loads.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Beijing Key Laboratory of Green Built Environment and Energy Efficient Technology, Beijing University of Technology , Beijing 100124, China
2 Beijing Key Laboratory of Green Built Environment and Energy Efficient Technology, Beijing University of Technology , Beijing 100124, China; Key Laboratory for Comprehensive Energy Saving of Cold Regions Architecture of Ministry of Education, Jilin Jianzhu University , Changchun 130118, China
3 College of Mechanical Engineering, Tianjin University of Commerce , Tianjin, 300134, China
4 Department of Mechanical Engineering, Faculty of Engineering, University Malaya , Kuala Lumpur 50603, Malaysia