It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The existing mechanical and grouting anchors mostly use the expansion shell method to form a cavity on the borehole wall, and the cement slurry is poured to form multiple enlarged head plates, but the operation is more difficult and the diameter of the formed plate is smaller. In this paper, a new type of large-diameter multi-plate soil anchor and its reaming cavity forming tool are proposed, which can make the operation easier and form a large-diameter enlarged head plate. In order to study the influence of the diameter of anchor plate, the number of anchor plates and the spacing of anchor plates on the vertical uplift capacity of the large-diameter multi-plate soil anchor, 25 sets of comparative models were established for simulation analysis. The finite difference method of FLAC3D software is used to simulate the model. It is found that when the length of the anchor is 6 m and the diameter of the anchor rod body is 150 mm, the optimal diameter of the anchor plate of the large diameter multi-plate soil anchor is 590 mm, the optimal number of anchor plates is 6, and the optimal anchor plate spacing is 800 mm, which means the action range of the anchor plate on the lower soil is about 5 times the diameter of the bolt. When the number of anchor plates is too small or the spacing between anchor plates is too large, the structural advantages of large-diameter multi-plate soil anchor cannot be fully utilized, resulting in a decrease in the ultimate uplift capacity. When the number of anchor plates is too large or the spacing between anchor plates is too small, the stress superposition effect occurs in the soil, and the through shear failure occurs, which leads to the decline of the ultimate uplift capacity. Under the condition that the number of anchor plates and the spacing of anchor plates are fixed, the larger the diameter of the anchor plate is, the larger the ultimate pull-out capacity of the large-diameter multi-plate soil anchor is, the smaller the vertical failure displacement of the anchor head is, but the increase of the uplift capacity is gradually reduced. The creep rate of the new large-diameter multi-plate soil anchor bolt is 0.91 mm, and the creep rate of equal-diameter soil anchor bolt is 1.69 mm. It is verified that the new large-diameter multi-plate soil anchor can be effectively applied to various projects.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Anhui University of Science and Technology, School of Civil Engineering and Architecture, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X)
2 Anhui University of Science and Technology, School of Civil Engineering and Architecture, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X); Anhui University of Science and Technology, Engineering Research Center of Underground Mine Ministry of Education, Huainan, China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X); Anhui University of Science and TechnologyShannan New DistrictAnhui Province, School of Civil Engineering and Architecture, Huainan, People’s Republic of China (GRID:grid.440648.a) (ISNI:0000 0001 0477 188X)