Abstract

3D printing is one of the most developing technologies currently. There are many materials present on the market that allow you to get quite good and durable prints. One of the most commonly used materials is polylactide. The article presents the results of research on the influence of 3D stamping temperature on the impact strength of PLA filament using the Charpy test method. The paper presents the results of the impact strength of PLA samples as a function of printing temperature. In the paper compare samples printed at temperatures of 185 °C, 200 °C, and 210 °C. The highest moment of force was obtained for the 5th sample printed at a temperature of 185 °C, and the lowest for the 5th sample printed at a temperature of 200 °C, however, the values between subsequent measurements differ by a maximum of 0.11 [kpm].

Details

Title
The influence of 3D printing temperature on the impact strength of polylactide
Author
Paśnikowska-Łukaszuk, M 1 ; Urzędowski, A 1 ; Szulżyk-Cieplak, J 1 ; Wlazło, M 1 ; Zaburko, J 1 

1  Lublin University of Technology , Fundamentals of Technology Faculty, Nadbystrzycka 38, 20-618 Lublin, Poland 
First page
012030
Publication year
2024
Publication date
Dec 2024
Publisher
IOP Publishing
ISSN
17426588
e-ISSN
17426596
Source type
Scholarly Journal
Language of publication
English
DOI
https://doi.org/10.1088/1742-6596/2911/1/012030
ProQuest document ID
3148838093
Copyright
Published under licence by IOP Publishing Ltd. This work is published under https://creativecommons.org/licenses/by/4.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.