Abstract

The accelerator-based boron neutron capture therapy (BNCT) system has been approved for specific cases covered by health insurance, and clinical trials for new cases in Japan are currently being conducted on other systems. Owing to the progress of accelerator-based BNCT, the operation of medical physics must be rendered more efficient. A water phantom is used for the quality assurance (QA) of the BNCT beam output procedure; however, a solid phantom is preferred for routine QA because of its ease of use. Additionally, because water phantoms cannot be readily used in some facilities owing to structural problems, solid phantoms are preferred for unified measurements at different facilities to compare beam outputs. In this study, we perform irradiation tests using an acrylic phantom and verify that an acrylic phantom can be used for QA. The distribution of thermal neutron flux and gamma-ray dose rate inside the acrylic phantom are evaluated through experiments and simulations. The results indicate that the acrylic phantom is suitable for routine QA and for comparing beam outputs among different systems. In the future, the same irradiation tests will be conducted at other facilities.

Details

Title
Characterization of acrylic phantom for use in quality assurance of BNCT beam output procedure
Author
Matsubayashi, Nishiki 1 ; Hu, Naonori 1 ; Takata, Takushi 1 ; Sasaki, Akinori 2 ; Kumada, Hiroaki 3 ; Nakamura, Satoshi 4 ; Masuda, Akihiko 5 ; Tanaka, Hiroki 1 

 Particle Radiation Oncology Research Center , Institute for Integrated Radiation and Nuclear Science, Kyoto University , 2, Asashiro-Nishi, Kumatori-cho, Sennan-gun, Osaka 590-0494 , Japan 
 Kansai BNCT Medical Center, Educational Foundation of Osaka Medical and Pharmaceutical University , Daigakumachi, Takatsuki, Osaka 569-0801 , Japan 
 Institute of Medicine, University of Tsukuba , 1-1-1, Tennodai, Tsukuba, Ibaraki 305-8575 , Japan 
 Division of Radiation Safety and Quality Assurance, National Cancer Center Hospital , 5-1-1 Tsukiji, Chuo-ku, Tokyo 104-0045 , Japan 
 National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology , 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 , Japan 
Pages
10-15
Publication year
2025
Publication date
Jan 2025
Publisher
Oxford University Press
ISSN
04493060
e-ISSN
13499157
Source type
Scholarly Journal
Language of publication
English
ProQuest document ID
3171188977
Copyright
© The Author(s) 2024. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology. This work is published under https://creativecommons.org/licenses/by/4.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.