The journal retracts and remove the article “Exploration of a Flexible Metasurface for Strain Sensors: A Perspective from 2D Grating Fabrication to Spectral Characterization” [1] cited above.
Following publication, concerns were brought to the attention of the Editorial Office relating to unauthorized use of a device presented in this study [1].
Adhering to our standard procedure, an investigation was conducted by the Editorial Office and Editorial Board that confirmed that appropriate permission had not been gained to use or publish a device, and the findings presented in this article. Following confirmation from the University of Tübingen, the Editorial Board have decided to retract and remove this publication [1], as per MDPI’s retraction policy (MDPI | Research and Publication Ethics).
This retraction was approved by the Editor-in-Chief of the journal Applied Science.
The authors did not provide a comment on this decision.
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Reference
1. Hu, H. Bayanheshig. RETRACTED: Exploration of a Flexible Metasurface for Strain Sensors: A Perspective from 2D Grating Fabrication to Spectral Characterization. Appl. Sci.; 2022; 12, 10007. [DOI: https://dx.doi.org/10.3390/app121910007]
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License.
Details
1 National Engineering Research Centre for Diffraction Gratings Manufacturing and Application, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China; University of Chinese Academy of Sciences, Beijing 100049, China
2 National Engineering Research Centre for Diffraction Gratings Manufacturing and Application, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China