Chemical Synthesis of Copper Nanoparticles

Abstract

Metal nanoparticles have attracted considerable interest particularly because of the size dependence of physical and chemical properties and its enormous technological potential. Among different metal nanoparticles, copper nanoparticles have attracted great attention because copper is one of the most key metals in new technology. Chemical methods are used to synthesize copper nanoparticles and among them chemical reduction is the most frequently applied method for the preparation of stable, colloidal dispersions in organic solvents. In this paper, a brief overview of the current research worldwide in the chemical synthesis of copper nanoparticles is discussed.

Introduction

Copper nanoparticles have great interest due to their optical, catalytic, mechanical and electrical properties. Copper is a good alternative material for noble metals such as Au and Ag as it is highly conductive and much more economical than them [1, 2]. Copper plays an important role in electronic circuits because of its excellent electrical conductivity. Copper nanoparticles are inexpensive and their properties can be controlled depending on the synthesis method. Also in catalyst, the nanoparticles have a higher efficiency than particles [3, 4, 5]. Copper nanoparticles are synthesized through different techniques. The most important methods for the synthesis of copper nanoparticles are chemical methods such as chemical reduction, electrochemical techniques, photochemical reduction and thermal decomposition. Copper nanoparticles can easily oxidize to form copper oxide. To avoid oxidation, these methods were usually performed in non-aqueous media, at low precursor concentration, and under an inert atmosphere (argon, nitrogen) [6, 7, 8, 9, 10]. In this paper, we reported the methods of chemical synthesis of copper nanoparticles and their characterization.

Copper Nanoparticles Synthesis

Chemical Reduction

One of the most important methods for the synthesis of copper nanoparticles is the reduction chemical method. In this technique a copper salt is reduced by a reducing agent such as polyols, sodium borohydride, Hydrazine, Ascorbic acid, hypophosphite [11, 12, 13, 14, 15]. In addition, it is used from capping agents such as Polyethylene glycol and poly (vinylpyrrolidone) [16, 17]. Some of the chemical reducing reactions can be carried out at room temperature. Salzemann et al used microemulsion method to synthesize nanoparticles of copper with size of 3-13 nm [18]. Copper nanoparticles were produced by the polyol method in ambient atmosphere. The obtained nanoparticles were confirmed by XRD to be crystalline copper. SEM study shows that sizes of particles produced were 48±8 nm [17]. Colloidal copper with particle sizes of 40–80 nm has been reported from reduction with sodium borohydride in aqueous solution at room temperature. The copper nanoparticles were stabilized by starch [19]. In 2008, copper nanoparticles were synthesized by the reduction of Cu²⁺ in solutions of poly(acrylic acid)-pluronic blends results in a stable sol of metallic copper with a particle size below 10 nm [20]. Reduction of copper ions by sodium borohydride in the presence of sodium polyacrylate was reported. Copper nanocrystals sizes were 14 nm [21]. Chatterjee et al. presented a simple method for synthesis of metallic copper nanoparticles using Cucl2 as reducing agent and gelatin as stabilizer with a size of 50-60 nm [22]. One of the chemical reduction methods is microemulsion technique. Microemulsions are isotropic, macroscopically homogeneous, and thermodynamically stable solutions containing at least three components, namely a polar phase (usually water), a nonpolar phase (usually oil) and a surfactant [23]. Copper nanoparticles synthesis was achievedby reduction of aqueous copper chloride solution using NaBH₄ in the nonionic water-in-oil (w/o) microemulsions [24]. Solanki et al. reported synthesis of copper sulphide and copper nanoparticles with microemulsion method. XRD analysis of nanoparticles confirmed presence of metallic copper [25]. In 2013, facile synthesis of size-tunable copper and copper oxide nanoparticles was presented by Kumar et al. They found that reduction with hydrazine hydrate in an inert N₂ environment gives copper nanoparticles whereas reaction with sodium borohydrate in aerobic condition gives copper(II) oxide nanoparticles [26]. In another study, copper salt was dissolved in dioxane/-AOT solution and reduced by hydrazine hydrate under vigorous stirring. Nanocolloids sizes were 70-80 nm [27].

Photochemical Method (Irradiation)

Another chemical method is photochemical method. In this technique, the system is excited by radiation and thus it is produced active reducing agent such as radicals, electrons and excited components. This method has an important advantage compared to chemical reduction and it is removing impurities at low temperature. It is often used for the synthesis of noble metals. In this technique, it was prepared the desired salt solution with water or alcohols or organic solutions. Then the solution put under the radiation. In these conditions, electrons are released and metal is reduced.

In 2003, copper nanoparticles were synthesized by a single photochemical route [28]. Kapoor et al. reported photochemical formation of copper nanoparticles in poly (N-vinylpyrrolidone). They showed average particle size for Cu was 15 nm [29]. Zhu et al. have synthesized copper nanoparticles using copper sulfate as a precursor and sodium hypophosphite as reducing agent in ethylene glycol under microwave irradiation. The size of copper nanoparticles prepared by this method was 10 nm [15]. In another work, the effect of the presence of poly (vinyl pyrrolidone) (PVP) on the copper nanoparticle formation, obtained by UV irradiation of ethanol solution of Cu(acac)₂ was investigated. It was found the advantages of the PVP use in the nanoparticle copper formation through the photochemical technique such as the exclusive formation of colloidal copper, their size control, stable colloidal solution and complete return to the starting complex [30]. In 2012, Zhu et al. reported a facile method forpreparing copper nanoparticles and patterned surfaces with copper stripes by ultraviolet (UV) irradiation of a mixture solution containing a photoinitiator and a copper–amine coordination compound. They also studied the mechanism of photoreduction by UV–vis spectroscopy and gas chromatography–mass spectrometry [31].

Electrochemical Method (Electrolysis)

Since long, electrolysis process was used to reduce of metal ions. Yang et al. reported synthesis of copper nanorods using electrochemical method. The mean diameter of a copper nanorod was equal to ca. 30 nm [32]. Zhang et al. used a novel electrochemical milling method to fabricate copper nanoparticles and nanofibers [33]. In another work, copper nanoparticles containing diamond-like carbon films were prepared on the Si substrate using electrochemical deposition method by choosing dimethylsulfoxide as carbon source and acetonitrile solution of [Cu(CH₃CN)₄]ClO₄ as dopant at relatively low voltage [34]. In two separate researches, copper nanoparticles were synthesized using copper sulphate by electrolysis method. They observed that the size of nanoparticles was about 40–60 nm [35, 36].

Thermal Decomposition

Thermal decomposition is a chemical decomposition caused by heat. The decomposition temperature of a substance is the temperature at which the substance chemically decomposes [37]. Kim et al. synthesized copper nanoparticles by using thermal decomposition of Cu-oleate complex, which was prepared by the reaction with CuCl2 and sodium oleate in aqueous condition. TEM image showed well-dispersed copper nanoparticles with diameter of 8.9 ± 1.3 nm [38]. In another work, copper oxalate was used as a precursor to prepare metallic copper nanoparticles by thermal decomposition. The size of nanoparticles was about 40 nm [39]. In 2014, synthesis of copper nanoparticles by thermal decomposition using copper chloride, sodium oleate, and phenyl ether as solvent agents was studied. TEM analysis showed spherical nanoparticles with sizes in the range of 4 to 18 nm. In addition, they investigated the antibacterial activity of copper nanoparticles synthesized against strains of Staphylococcus aureus and Pseudomonas aeruginosa [40].

Conclusions

Here, we described different approaches for fabricating copper nanoparticles using chemical methods. Chemical methods such as chemical reduction, photochemical, electrochemical, and thermal decomposition are used to synthesize copper nanoparticles and among them chemical reduction is the most frequently applied method for the preparation of stable, colloidal dispersions in organic solvents. Copper nanoparticles can easily oxidize to form copper oxide. Therefore, the reduction methods are usually performed under an inert atmosphere, in organic solvents or in presence of surfactants such as poly (vinyl pyrrolidone).

References

1. Athanassiou, E.K., Grass, R. N., & Stark, W. J. (2007). Large scale production of carbon coated copper nanoparticles for sensor applications. Nanotechnology, 17, 1668-1673.

2. Moya, J. S., Pecharroman, C., Cubillo, A. & Montero, I. (2006). Monodisperse and corrosion resistant metallic nanoparticles embedded into sepiolite particles for optical and magnetic applications. Journal of American Ceramic Society, 89 (10), 3043-3049.

3. Kang, X., Mai, Z., Zou, X., Cai, P. & Mo, J. (2007). A sensitive nonenzymatic glucose sensor in alkaline media with a copper nanocluster/multiwall carbon nanotube-modified glassy carbon electrode. Analytical Biochemistry, 363, 143–150.

4. Kantam, M. L., Jaya, V. S., Lakshmi, M. J., Reddy, B. R., Choudary, B. M. & Bhargava, S.K. Alumina supported copper nanoparticles for aziridination and cyclopropanation reactions. Catalysis Communications, 8, 1963–1968.

5. Rodriguez, J. A., Liu, P., Hrbek, J., Evans, J. & Perez, M. (2007). Water gas shift reaction on Cu and Au nanoparticles supported on CeO2(111) and ZnO(0001): intrinsic activity and importance of support interactions. Angewandte Chemie International Edition, 46, 1329-1332.

6. Panigrah, S., Kundu, S., Ghosh, S. K., Nath, S., Praharaj, S., Soumen, B. & Pal, T. (2006). Selective one-pot synthesis of copper nanorods under surfactantless condition. Polyhydron, 25, 1263-1269.

7. Nikhil, J., Zhong, L. W., Tapan, K. S. & Tarasankar, P. (2000). Seed-mediated growth method to prepare cubic copper nanoparticles. Current Science, 79(9), 1367-1370.

8. Zhong, C. J., Mott, D., Galkowski, J., Wang, L. & Luo, J. (2007). Synthesis of size controlled and shaped copper nanoparticles. Langmuir, 23, 5740-5745

9. Wang, C. Y., Zhou, Y., Chen, B., Liu, H. J. & Mo, X. (1999). Preparation of shell-core Cu2O-Cu nanocomposite particles and Cu nanoparticles in a new microemulsion system. Journal of Colloid and Interface Science, 220, 468-470.

10. Wu, S. H. & Chen, D. H. (2004). Synthesis of high concentration Cu nanoparticles in aqueous CTAB solutions. Journal of Colloid and Interface Science, 273, 165-169.

11. Park, B. K., Jeong, S., Kim, D., Moon, J., Lim, S. & Kim, J. S. (2007). Synthesis and size control of monodisperse copper nanoparticles by polyol method. Journal of Colloid and Interface Science, 311(2), 417-424.

12. Song, X.Y., Sun, S.X., Zhang, W.M. & Yin, Z.L. (2004). A method for the synthesis of spherical copper nanoparticles in the organic phase. Journal of Colloid and Interface Science, 273(2), 463-469.

13. Su, X.D., Zhao, J.Z., Bala, H., Zhu, Y.C., Gao, Y., Ma, S.S. & Wang, Z.C. (2007). Fast Synthesis of Stable Cubic Copper Nanocages in the Aqueous Phase. The Journal of Physical Chemistry C., 111(40), 14689–14693

14. Wu, C., Mosher, B.P. & Zeng, T. (2006). One-step green route to narrowly dispersed copper nanocrystals. Journal of Nanoparticle Research, 8(6), 965-969.

15. Zhu, H.T., Lin, Y.S & Yin, Y.S. (2004). A novel one-step chemical method for preparation of copper nanofluids, Journal of Colloid and Interface Science, 277(1), 100-103.

16. Dang, T. M. D., Le, T. T. T., Fribourg-Blanc, E., Dang, M.C. (2011). Synthesis and optical properties of copper nanoparticles prepared by a chemical reduction method. Adv. Nat. Sci.: Nanosci. Nanotechnol. 2, 015009 (6pp).

17. Park, B. K., Jeong, S., Kim, D., Moon, J., Lim, S., Kim, J. S. (2007) Synthesis and size control of monodisperse copper nanoparticles by polyol method, Journal of Colloid and Interface Science 311, 417–424

18. Salzemann, c., Lisiecki, I., Brioude, A., Urban, j. & Pileni, M.P. (2004). Collections of Copper Nanocrystals Characterized by Different Sizes and Shapes: Optical Response of These Nanoobjects. The Journal of Physical Chemistry B, 108(35), 13242–13248.

19. Suramwar, N.V., Thakare, S.R., Khaty, N.T. (2012). One pot synthesis of copper nanoparticles at room temperature and its catalytic activity, Arabian Journal of Chemistry, http://dx.doi.org/10.1016/j.arabjc.2012.04.034

20. Ostaeva, G.Y., Selishcheva, E.D., Pautov, V.D. & Papisov, I.M. (2008). Pseudotemplate synthesis of copper nanoparticles in solutions of poly(acrylic acid)-pluronic blends. Polymer Science Series B, 50 (5-6), 147-149.

21. Prucek, R., Kvítek, L., Panáček, A., Vančurová, L., Soukupová, J., Jančík, D. & Zbořil, R. (2009). Polyacrylate-assisted synthesis of stable copper nanoparticles and copper (I) oxide nanocubes with high catalytic efficiency. Journal of Materials Chemistry, 19, 8463-8469.

22. Chatterjee, A.K., Sarkar, R.K., Chattopadhyay, A.P., Aich, P., Chakraborty, R. & Basu, T. (2012). A simple robust method for synthesis of metallic copper nanoparticles of high antibacterial potency against E. coli. Nanotechnology, 23(8), 85103-85113.

23. Malik, M.A., Wani, M.Y. & Hashim, M.A. (2012). Microemulsion method: A novel route to synthesize organic and inorganic nanomaterials. Arabian Journal of Chemistry, 5, 397–417.

24. Qi, L., Ma, J., Shen, J. (1997). Synthesis of Copper Nanoparticles in Nonionic Water-in-Oil Microemulsions, Journal of Colloid and Interface Science, 186 (2), 498-500.

25. Solanki, J.N., Sengupta, R., Murthy, Z.V.P. (2010). Synthesis of copper sulphide and copper nanoparticles with microemulsion method, Solid State Sciences, 12 (9), 1560-1566.

26. Kumar, A., Saxena,A., De, A., Shankar, R., Mozumdar, S. (2013). Facile synthesis of size-tunable copper and copper oxide nanoparticles using reverse microemulsions, RSC Adv., 3, 5015-5021.

27. Kaminskiene, Z., Prosy£evas, I., Stonkute, J. & Guobiene, A. (2013). Evaluation of Optical Properties of Ag, Cu, and Co Nanoparticles Synthesized in Organic Medium. Acta Physica Polonica A, 123, 111-114.

28. Condorelli, G.G., Costanzo, L.L., Fragalà, I.L., Giuffridaa, S., Ventimigliaa, G. (2003). A single photochemical route for the formation of both copper nanoparticles and patterned nanostructured films, J. Mater. Chem., 13, 2409-2411.

29. Kapoor, S., Mukherjee, T. (2003). Photochemical formation of copper nanoparticles in poly(N-vinylpyrrolidone), Chemical physics letters, 370 (1-2), 83-87.

30. Giuffrida, S., Costanzia, L. L., Ventimiglia, G. & Bongiorno, C. (2008). Photochemical synthesis of copper nanoparticles incorporated in poly(vinyl pyrrolidone). Journal of Nanoparticle Research, 10(7), 1183-1192.

31. Zhu, X., Wang, B., Shi, F., Nie, J. (2012). Direct, Rapid, Facile Photochemical Method for Preparing Copper Nanoparticles and Copper Patterns, Langmuir, 28 (40), 14461–14469.

32. Yang, X., Chen, S., Zhao, S., LI, D., MA, H. (2003). Synthesis of copper nanorods using electrochemical methods, J.Serb.Chem.Soc., 68 (11), 843–847.

33. Zhang, D.W., Chen, C.H., Zhang, J., Ren, F. (2005). Novel electrochemical milling method to fabricate copper nanoparticles and nanofibers. Chem. Mater., 17 (21), 5242–5245

34. Huang, L., Jiang, H., Zhang, J., Zhang, Z., Zhang, P. (2006). Synthesis of copper nanoparticles containing diamond-like carbon films by electrochemical method, Electrochemistry Communications, 8 (2), 262–266.

35. Raja, M., Subha, J., Ali, F.B. & Ryu, S.H. (2008). Synthesis of Copper Nanoparticles by Electroreduction Process. Materials and Manufacturing Processes, 23(8), 782-785.

36. Theivasanthi, T. & Alagar, M. (2011). Studies of Copper Nanoparticles Effects on Micro-organisms, Annals of Biological Research, 2 (3), 368-373.

37. Yu, S.H. (2001). Hydrothermal/Solvothermal Processing of Advanced Ceramic Materials. Journal of the Ceramic Society of Japan, 109, 65-75.

38. Kim, Y.H., Kang, Y.S., Lee, W.J. (2006). Synthesis of Cu Nanoparticles Prepared by Using Thermal Decomposition of Cu-oleate Complex, Mol. Cryst. Liq. Cryst., 445, 231-238

39. Salavati-Niasari, M., Davar, F., Mir, N. (2008). Synthesis and characterization of metallic copper nanoparticles via thermal decomposition, Polyhedron, 27 (17), 3514–3518.

40. Betancourt-Galindo, R., Reyes-Rodriguez, P. Y., Puente-Urbina, B. A., Avila-Orta, C. A., Rodríguez-Fernández, O. S., Cadenas-Pliego, G., Lira-Saldivar, R. H. & García-Cerda, L. A. Synthesis of Copper Nanoparticles by Thermal Decomposition and Their Antimicrobial Properties. Journal of Nanomaterials,http://dx.doi.org/ 10.1155/ 2014/980545.