It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
In Iraq the problem of electricity shutdown in the main supply is still exists and the cuts may last for hours. This shutdown causes problems in lectures and students experiments in the colleges because all electrical devices are off. PV system is a good alternative source to overcome such a problem; therefore a stand-alone photovoltaic power system is presented in this paper to supply department laboratories to ensure power continuity. A stand-alone PV system is presented to supply three laboratories selected as a case study, these laboratories belong to the electronic and communications engineering department, Al-Nahrain University, Baghdad. The loads for these laboratories were calculated based on what are exists already from electrical devices assuming that they were fully on during work time. The Pvsyst6 software package is used for simulation purposes in this work.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer