It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
Magnesium and its alloys are explored as potential biomedical materials for being lightweight, bio-absorbable, and having attractive biological properties. A major hindrance for their use is their high corrosion rate, in particular when exposed to body fluids. This study aims at suppressing the corrosion rate of a magnesium alloy (Mg1.0Ca) by coating it with magnesium fluoride (MgF2). The coating was done by immersion of the workpiece in hydrofluoric acid solution. For comparison, pure magnesium was also coated with MgF2. The MgF2 coated magnesium exhibits significantly lower corrosion rate than pure magnesium. The MgF2 coated magnesium alloy shows even lower corrosion rate. The MgF2 coating works in inhibiting corrosion on magnesium alloy Mg1.0Ca. The corrosion inhibition was also contributed by other compound formed during reaction between Mg1.0Ca and hydrofluoric acid and the alloy in Mg1.0Ca.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat 86400, Malaysia
2 Faculty of Engineering, Universiti Teknologi Brunei, Gadong BE1410, Brunei Darussalam