It appears you don't have support to open PDFs in this web browser. To view this file, Open with your PDF reader
Abstract
The precipitation behavior of the second phase in Fe-18Cr-17Mn-2Mo-0.85N high nitrogen and nickel-free austenitic stainless steel after grain boundary character distribution (GBCD) optimization was investigated. The results show that the fraction of low Σ coincidence site lattice (CSL) boundaries increases from 47.9% for the solid solution treated specimen to 82.25% for the specimen cold-rolled by 5% and then annealed at 1423 K for 72 h (r5%-a1423 K/72 h). Compared with the solution treated sample, nitride precipitation is obviously restrained and the fraction of precipitates is the least in r5%-a1423 K/72 h sample with the highest proportion of SBs. The appearance of a high proportion of CSL boundaries with low energy inhibits the nitrides precipitation through GBCD optimization.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Details
1 Institute of Materials Physics and Chemistry, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
2 Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China
3 Institute of Materials Physics and Chemistry, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China; Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China